The Shaver Needs To Be Replaced After Being Used Too Long

It depends. Shavers are generally divided into electric and manual two kinds, usually the head of the electric razor needs 2 months to be replaced, but you need to pay attention to the health of the electric razor when using. If used and stored well, it can be used for six months to one year; If the manual razor is generally used 8-10 times, it needs to be replaced, if it is often used and the beard is relatively thick, it is recommended that you need to often replace the new head to shave more cleanly.
In general, it is replaced once every 2 months, but the hardness of the personal beard and the amount of beard are also factors that determine the frequency of blade replacement. When shaving feels that the blade is very raw and shaving is not smooth, it is the shaving tool that sends a replacement signal. Of course, in order to make the life of the slice longer, it is recommended not to lose the knife box attached to the razor when buying, and wash the blade with water after shaving and put it in the knife box to dry. Do not litter the sink, this will only let the blade breed bacteria, reduce the life of the blade.
1. Usually, you need to change the blade every 5-7 times. But how often you actually change your blades depends on how thick your beard is and how often you shave.
2. After shaving, run the brush along the blade to remove the dandruff, and then spray the cleaning and disinfecting lubricant to keep the blade sharp.
3. Clean the knife head often, but pay special attention to not let the blade be hurt when cleaning. When rinsing the knife body with clean water, the body is best not to touch the water if you use the product. It is a dry and wet dual-use type, and the base part is still not in contact with water, so as not to damage the motor.
4. Do not use electric shavers with insufficient power, forced use will make the motor of the electric shaver wear out.
5. The cutting edge and pores of the internal and external knives are easy to hide shavings and dander, and should be cleaned after each use.
6. Try to clean with a small brush. Due to the curing of shavings and skin oil, it will hinder the movement and sharpness of the blade, so it is necessary to often remove the residue on the cutting edge. On the debris.
7. Because the external knife is thin, do not push the big knife to avoid deformation. Once the shape is changed, it will hinder the rotation of the internal knife, or it will cut the skin when used. If the cutting edge is deformed and damaged, it should not be used again, otherwise there will be a risk of cuts.
8. Turn off the switch after use. To protect the blade, it is necessary to put on a protective cover, then pack it in a box, and store the razor in a dry place.